top of page
rust-bullet-logo.png
ClearShot.png
Clear01

Rust Bullet Clear Shot
(Available in Standard and Duragrade Low VOC Formulas)

DuraGrade Clear

DuraGrade Clear Product Information

DuraGrade Clear is a high-performance, ultra-low VOC, rust inhibitive and protective coating. With just 49 g/l of VOCs, DuraGrade Clear’s patent pending formula is an environmentally preferred ultra-low VOC coating compliant in every state and air quality management district. DuraGrade Clear can be used as a standalone coating or as a topcoat and can be applied directly onto clean or rusted metal, concrete, wood and other surfaces. DuraGrade Clear has superior adhesion and provides excellent corrosion protection and abrasion resistance. Easy to apply by brush, roller, or spray equipment. Scratch, chip, chemical and UV Resistant. Ideal for indoor or outdoor surfaces. Perfect for sealing in the Rust Bullet decorative flakes. Anti-skid material can be added for an anti-skid surface. Dries to a water clear finish.

 

DuraGrade Performance Testing

 

  • Taber Abrasion (ASTM D4060): 38 mg / 10,000 Cycles

  • Impact Resistance (ASTM D2794): >40 inches (exceeds max test limits)

  • Mandrel Bend (ASTM D 522-13): >32% without cracking (exceeds test)

  • Pull-off Adhesion Bond Strength (ASTM D7234-05):

    • 50mm dolly: >525 PSI (Dollies unable to be removed at ~525 max psi)

    • 20mm dolly: >1485 PSI (concrete broke apart and DuraGrade never lost adhesion)

       

bottom of page