Rust
Bullet Warranty
Rust Bullet, LLC warrants its products to be free
from material defects. Rust Bullet® is manufactured
under the strict formula specifications that were
established in its extensive scientific studies. Any
application or procedure which is different from the
Rust Bullet guidelines that were used and proven in
these studies will render Rust Bullet ineffective,
as set forth below.
10 YEAR LIMITED WARRANTY
Rust Bullet’s Warranty Program is in effect subject
to the limits stated below. The warranty is limited
specifically to the refinished
area to which the Rust Bullet® Standard or Rust
Bullet® Automotive Formulas are applied.
The Rust Bullet Warranty requires the minimum
coverage be a finished dry film thickness (DFT) of
six (6) mils. For industrial or marine applications,
repeated coatings of Rust Bullet to be not less than
a finished dry film thickness (DFT) of twelve (12)
mils are required for the warranty to apply.
Inspection of the application method and electronic
inspection with a mil gauge may be performed by Rust
Bullet, at its option, for warranty verification.
Preparation includes removal of all large debris and
loose scale with a wire brush, by machine, or other
approved methods.
The Rust Bullet Warranty is void when an area
covered is previously compromised by penetration.
While prepping and re-coating may prove
satisfactory, such applications are beyond the scope
of this warranty.
The Rust Bullet Warranty is void when an area
previously covered is later compromised by
penetration through the Rust Bullet coating;
however, prepping and re-coating per manufacturer’s
recommendations in the compromised area will
reactivate the original warranty.
This warranty is to the original purchaser only, and
excludes product damage due to application error,
product abuse, or product misuse.
The Rust Bullet Warranty is void if the product is
reduced, thinned, diluted or altered without prior
written permission from Rust Bullet.
Rust Bullet preserves, at its option, the right to
replace any Product which does not conform to the
warranty or, in the alternative, to refund the
Products' purchase price.
WE DO NOT ACCEPT LIABILITY BEYOND THE REMEDIES
PROVIDED FOR IN THIS LIMITED WARRANTY OR FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING,
WITHOUT LIMITATION, ANY LIABILITY FOR THIRD-PARTY
CLAIMS AGAINST YOU. UNDER NO CIRCUMSTANCES WILL OUR
LIABILITY BE MORE THAN THE AMOUNT PAID FOR THE
PRODUCT WHICH IS THE SUBJECT OF A CLAIM.
This warranty is given in lieu of all other
warranties, express or implied. Implied warranties,
including without limitation, the implied warranties
of merchantability and fitness for a particular
purpose, apply only if specifically required by law,
and then only to the minimum extent required by such
laws. Otherwise, all other warranties are
specifically excluded.
This warranty gives you specific legal rights and
you may also have other rights which may vary from
state to state. At the time of any inspection, if it
is found that preparation or application procedures,
or the use of the product were not in strict
accordance with normal uses and instructions, the
warranty is void.
Rust Bullet Company and Product information and data
are subject to change without notice. Please contact
Rust Bullet, LLC or your Rust Bullet Representative
for current and updated information.
Rust Bullet® is a Registered Trademark and has been
awarded two United States Patents.
05/07 |